ad_group
  • neiye

Single Knuckle Wrought Iron Baluster/Spindles

Short Description:

If you are looking for any simple design, then the Modern Look Wrought Iron Baluster/Spindle Series could greatly accommodate a contemporary home as well as a traditional one on what effect you desire. It is typically used in a pattern with other versatile series balusters like a plain and double knuckle, scrolls, twist & basket series, and the Modern Look Wrought Iron Baluster/Spindle Series can greatly accommodate a contemporary home as well as a traditional one.

  • Dimensions 44 inches x 1/2 inch,
  • Square bar with one knuckle
  • Available in Standard Hollow Tubular and Solid
  • Hide the transition from baluster to step with a 1/2 inch base shoe
  • All finishes are a powder-coated which is one of the most wanted surface finishing techniques. It’s a firm, durable finish very resistant to scratches, cracking, peeling, UV rays and rust.


Product Detail

Product Tags

How to Clean Wrought Iron Balusters the Right Way

Most of owners will agree that wrought iron is one of the perfect material to use in the construction of balusters. Which is strong, durable, resistant to rust, and offers a classic look that works well in practically any home decor. If your home is decorated with contemporary, vintage or even rusted elements, you easily can’t go wrong with wrought iron balusters. Just like any material, though, wrought iron must be occasionally cleaned in order for it to maintain a sleek and attractive appearance.

How to Clean Wrought Iron Balusters the Right Way

Dusting Wrought Iron

No matter how hard you try to prevent it, dust will inevitably gather on your home’s wrought iron balusters. You will want to avoid using harsh furniture polish sprays and products, because they tend to leave behind a chemical-ridden residue that can slowly damage the metal over time. In other words, take a lint-free microfiber cloth and simply run it across the surface of your wrought iron balusters to remove any dust. When done in right way, this should be able to remove most of the dust.

Alternatively, also you can use a basic feather duster on your wrought iron balusters. Just swat it back and forth over the surface of the metal to dust it. The only problem with this method is that it essentially knocks the dust off onto the floor instead of capturing it. Unless you vacuum at once afterwards, the dust will remain on the floor where it eventually blows back onto your furniture and furnishings.

singleimg2

Deep-Cleaning Wrought Iron

Certainly, sometimes it will take a little more than a microfiber cloth or feather duster to clean your wrought iron balusters. If you’ve neglected them for months on end, then you’ll need to take a more direct approach. There are few different ways to give wrought iron a deep cleaning, but one of the safest and most effective methods is to use diluted vinegar. Fill a small bucket up with 2 parts water and 1 part white distilled vinegar. Soak a towel in the solution, ring it out, and then use it to scrub down your wrought iron balusters.

When you are done scrubbing down your wrought iron balusters with the solution of diluted vinegar, go back over it with a clean towel or hand cloth to dry it. This should result in a freshly clean metal that looks as pristine as it did when it was first installed.


  • Previous:
  • Next:

  • Write your message here and send it to us